How much shock to add to a pool
Shocking means raising free chlorine (FC) well above its everyday level. The amount depends on four things: your pool's volume, your free chlorine now, the level you want to reach, and the strength of the product. One ppm is one milligram of chlorine in each liter of water, so:
Grams of chlorine = liters of water × (target ppm − current ppm) ÷ 1,000
Liters of water = gallons × 3.785
Then divide by the product's strength: the "available chlorine" percentage for granules, or grams of chlorine per liter for liquid chlorine and bleach (see the chlorine calculator for how the label strength converts).
Example: a 15,000-gallon pool (56,781 L) at 1 ppm, shocked to 10 ppm, needs 56,781 × 9 ÷ 1,000 = 511 g of chlorine. With 65% cal-hypo that is 511 ÷ 0.65 = 786 g, about 1.7 lb, so two 1-lb bags. With liquid chlorine labeled 12.5% sodium hypochlorite it is 3.6 L, a little under a gallon.
Shock per 10,000 gallons
| Product | Raise 1 ppm | Raise 10 ppm | Raise 20 ppm |
|---|---|---|---|
| Cal-hypo, 65% | 2.05 oz | 20.5 oz (1.28 lb) | 2.57 lb |
| Cal-hypo, 73% | 1.83 oz | 18.3 oz (1.14 lb) | 2.29 lb |
| Dichlor, 56% | 2.38 oz | 23.8 oz (1.49 lb) | 2.98 lb |
| Liquid chlorine, 12.5% sodium hypochlorite | 9.0 fl oz | 90 fl oz (0.70 gal) | 1.40 gal |
| Liquid chlorine, 10% sodium hypochlorite | 11.6 fl oz | 116 fl oz (0.91 gal) | 1.82 gal |
| Household bleach, 8.25% | 14.5 fl oz | 145 fl oz (1.13 gal) | 2.26 gal |
| Household bleach, 6% | 20.5 fl oz | 205 fl oz (1.60 gal) | 3.21 gal |
Granules are by weight. In The Swim's shock chart gives close to the same amounts for 10 ppm in 10,000 gallons (21 oz of cal-hypo, about 1½ lb of dichlor).
What "1 pound per 10,000 gallons" really gives
Most bags of shock weigh 1 lb, and the common rule is one bag per 10,000 gallons. That raises free chlorine by about 7.8 ppm with 65% cal-hypo, 8.7 ppm with 73% and 6.7 ppm with dichlor, which fits the 5 to 10 ppm "superchlorination" that chlorine labels describe. Labels do not all agree on the gallons, though: registered cal-hypo labels say 1 lb treats anywhere from 10,000 to 16,500 gallons, depending on strength and the level they aim for. That is why the calculator works from the ppm you want rather than from a bag count.
Routine shock or algae shock?
A routine shock is a one-time boost when the water is clear: weekly, after a pool party or heavy rain, or at opening. The calculator aims for 10 ppm, the top of the label range. If your stabilizer (CYA) is 70 ppm or more, your everyday target is already near 10, so a routine shock does little; keep chlorine at the right level for your CYA instead (see the chlorine calculator).
An algae shock is different. Green or cloudy water, combined chlorine over 0.5 ppm, or chlorine that drops more than 1 ppm overnight all mean something is using up chlorine. Trouble Free Pool's method, SLAM (Shock Level And Maintain), raises free chlorine to a level set by your CYA and holds it there, testing and topping up several times a day, until the water passes three checks. One big dose that is then allowed to fade is a common reason a green pool stays green.
Shock level by CYA
| CYA | Shock level (FC) | 12.5% liquid chlorine per 10,000 gal, from 0 |
|---|---|---|
| 0 to 20 | 10 | 90 fl oz (0.70 gal) |
| 30 | 12 | 108 fl oz (0.84 gal) |
| 40 | 16 | 1.12 gal |
| 50 | 20 | 1.40 gal |
| 60 | 24 | 1.68 gal |
| 70 | 28 | 1.96 gal |
| 80 | 31 | 2.18 gal |
| 90 | 35 | 2.46 gal |
| 100 | 39 | 2.74 gal |
The levels are from Trouble Free Pool's chlorine/CYA chart; the calculator rounds CYA up to the next row. They work out to about 40% of the CYA, the same rule of thumb other pool sources use. CYA holds most chlorine in a weaker form, so the more stabilizer in the water, the more chlorine it takes. Trouble Free Pool suggests CYA of about 30 to 40 for an outdoor SLAM; below 30, sunlight burns off too much chlorine, and above 70 it replaces water first, because the levels needed become impractical.
Why liquid chlorine for an algae shock
Holding a shock level for several days takes many doses. Dichlor adds about 0.9 ppm of CYA for every 1 ppm of chlorine, so each dose raises the level you need to reach; trichlor does the same. Cal-hypo adds about 0.7 ppm of calcium hardness per ppm. Liquid chlorine and bleach add neither, which is why Trouble Free Pool uses liquid chlorine only. Indiana's health department, for one, does not allow stabilized chlorine for shocking public pools.
What about breakpoint chlorination (10 × combined chlorine)?
Health departments describe breakpoint chlorination for public pools: measure combined chlorine (total minus free) and bring free chlorine to about 10 times that level. That guidance is written for public pools. In a home pool with CYA, chlorine is mostly held by the stabilizer, and many experienced pool owners consider the rule unreliable there. This calculator treats combined chlorine over 0.5 ppm as one of the signs to shock to the level for your CYA, and to hold it until combined chlorine is 0.5 ppm or lower.
How to shock a pool safely
- Read the product label first and follow it where it differs from this page, including whether to dissolve granules first or broadcast them dry.
- Never mix shock with other chemicals. Cal-hypo that touches trichlor or dichlor can catch fire or explode, and chlorine mixed with acid gives off chlorine gas. Never put shock in a skimmer or a tablet feeder. Use a clean, dry scoop for each chemical.
- If you dissolve granules, add them to a bucket of water, never water onto the granules. Do not let undissolved granules sit on a vinyl liner.
- Wear eye protection and gloves. Add shock in the evening, with the pump running and nobody in the water.
- Test with a kit that reads high levels. Many strips and basic test kits stop at 5 or 10 ppm, and DPD tests can bleach out and read falsely low above that; a FAS-DPD drop kit reads shock levels.
- Swim only when free chlorine is back at or below the level your label allows; many chlorine labels prohibit swimming above 4 ppm.
- Store shock cool and dry, in its own closed container, away from acid and other pool chemicals, and out of reach of children and pets.
Why the shock did not work
- Chlorine was not held. Algae uses up chlorine fast. If free chlorine falls back below the shock level between doses, the algae recovers. Test and top up several times a day.
- CYA is too high. At high CYA, a few bags never reach the shock level. Test CYA with a proper kit; if it is over about 70, replacing part of the water is the fix.
- The shock added stabilizer. Dichlor and trichlor "shocks" raise CYA with every bag, which raises the level you need.
- The test could not read it. A test that tops out at 5 or 10 ppm cannot tell you whether you reached 20.
- The product or the volume is off. Old or hot-stored liquid chlorine is weaker than its label, and a 20% error in gallons is a 20% error in the dose.
- The filter is not keeping up. Dead algae can leave the water cloudy; clean or backwash the filter, and give it time.
Pool shock questions
How many bags of shock does my pool need?
For a routine shock, about one 1-lb bag per 10,000 gallons, or what your bag's label says. For algae, it depends on your CYA and how much chlorine the algae is using: enter your readings above, choose "Algae or cloudy", and the result shows the first dose and how much each top-up takes.
How long after shocking can I swim?
When free chlorine is back at or below the limit on your product label; many labels say 4 ppm. After a routine shock that is often the next day. After an algae shock it can take a few days to come down once you stop adding chlorine. If you overshot, stop adding chlorine and wait: sunlight and use bring it down, and testing tells you when.
How often should I shock my pool?
Cal-hypo labels suggest a routine shock about every one to two weeks, or as needed. If you keep free chlorine at the right level for your CYA, you may only need to shock when a test shows a reason: combined chlorine over 0.5 ppm, more than 1 ppm lost overnight, or any algae. Those are the signs Trouble Free Pool uses to start a SLAM.
Can I shock with bleach or liquid chlorine?
Yes. Liquid chlorine and plain, unscented bleach are the same chemical, sodium hypochlorite, and they add no stabilizer or calcium. You need more volume than with granules: about a gallon of 12.5% liquid chlorine raises 10,000 gallons by 14 ppm.
What about non-chlorine shock?
Non-chlorine shock (potassium monopersulfate) oxidizes swimmer waste but adds no free chlorine and will not kill algae, so this calculator does not cover it. Follow its label for the dose and when to swim.
Should I shock a saltwater pool?
Yes, when it has algae or cloudy water; the shock level for your CYA is the same. Trouble Free Pool's method uses liquid chlorine and has you turn the generator off until you are done.
Someone pooped in the pool. How much chlorine?
The CDC's guidance for pool staff: remove the poop, then for a formed stool raise free chlorine to 2 ppm (if it is below that) with pH 7.5 or less, and hold it for 25 to 30 minutes before anyone swims. Diarrhea is a bigger risk: in water with no stabilizer, 20 ppm held for 12.75 hours. Stabilizer slows germ killing a lot, so with CYA in the water the CDC calls for longer times or higher levels; follow its guidance or your local health department's rules. You can type 2 or 20 as the target above.
Sources
- 1 ppm = 1 mg per liter, and pounds = gallons × 8.34 × ppm ÷ 1,000,000: Florida DEP water treatment formula sheet. Shock amounts for 10 ppm per 10,000 gallons: In The Swim
- Superchlorination of 5 to 10 ppm (10 to 20 oz of 65% cal-hypo per 10,000 gallons): EPA label, Reg. 101928-1. 1 lb per 10,000 gallons: EPA label, Reg. 84988-2; 1 lb treats 16,500 gallons and "do not pre-dissolve": EPA label, BioGuard Calcium Hypochlorite 73; 1 lb per 13,500 gallons: HTH. Re-entry prohibited above 4 ppm after a shock: EPA, HTH Pool Shock label review. Add in evening hours: EPA label, Reg. 1258-1066
- Shock (SLAM) levels by CYA: Trouble Free Pool chlorine/CYA chart. When to SLAM, CYA before you start, liquid chlorine only, testing 3 to 4 times a day, the three checks, and how much to buy: Trouble Free Pool, the SLAM process. About 40% of CYA: Clear Comfort
- No stabilized chlorine for shocking, and breakpoint chlorination at 10 times combined chlorine: Indiana Department of Health, How to Shock the Pool; Pool & Spa News; Snohomish Health District. Doubts about the 10 × rule: Trouble Free Pool forum. Combined chlorine no higher than 0.5 ppm: Multnomah County Environmental Health
- CYA from dichlor (0.9 ppm per ppm of chlorine): AQUA Magazine; calcium from cal-hypo (0.7 ppm): In The Swim. Both also follow from the molar masses.
- Test bleach-out above 10 ppm: CDC, home pool water treatment and testing. Public pools not open to swimmers above 10 ppm: CDC 2024 MAHC inspection cheat sheet. Poop in the pool: CDC fecal incident response recommendations
- "Do not mix with calcium hypochlorite" on a stabilized chlorine label: EPA label, Reg. 67262-36. Chemical safety (never mix, chemicals into water, cal-hypo with acid): New York State Department of Health and Virginia Department of Health
Last checked November 23, 2026. Always follow the label on your shock product.
Related calculators
- Pool Volume CalculatorHow many gallons your pool holds. Any shape, sloped or hopper floors, above-ground pools.
- Pool Salt CalculatorHow much salt to add, in pounds and bags, for your generator's target. Too high? How much water to replace.
- Pool Chlorine CalculatorHow much liquid chlorine, bleach or granules to add, with a target set by your stabilizer (CYA) level.