CalcMyPool

Pool Chlorine Calculator

Work out how much liquid chlorine, bleach, granules or tablets to add to reach your free chlorine target. Enter your stabilizer (CYA) reading and it suggests the right target, then shows what the dose does to CYA or calcium and when it is safe to swim.

Not sure? Work it out with the pool volume calculator, then come back.

Use the Active Ingredient line on the label: "Sodium hypochlorite … 12.5%". Old or hot-stored chlorine is weaker than the label says.

How the pool gets chlorine

Sets the chlorine level you need. 0 if the pool has no stabilizer (common indoors).

Free chlorine (FC), not total. A drop kit (FAS-DPD) is far more accurate than strips.

Enter your CYA (stabilizer) above for a suggested target, or type your own.

Jug size

Chlorine to add

–

  • –raise
  • –target
  • –ppm per jug

How it was worked out

To see the result, enter your free chlorine reading and a target.

How much chlorine to add to a pool

You need four things: your pool's volume, your free chlorine (FC) reading, your target, and the strength of the product. One ppm (part per million) is one milligram of chlorine in each liter of water, so the chlorine needed is:

Grams of chlorine = liters of water × (target ppm − current ppm) ÷ 1,000
Liters of water = gallons × 3.785

Then divide by how much chlorine the product holds. For granules and tablets that is simply the "available chlorine" percentage on the label. For liquid chlorine and bleach it is grams of chlorine per liter, which depends on how the label states the strength (see the next section).

Example: a 15,000-gallon pool (56,781 L) at 1 ppm, aiming for 5 ppm, needs 56,781 × 4 ÷ 1,000 = 227 g of chlorine. Liquid chlorine labeled 12.5% sodium hypochlorite holds about 142 g of chlorine per liter, so that is 1.59 L, or 54 fl oz. With 6% household bleach it is 123 fl oz, almost a gallon. With 65% cal-hypo it is 12.3 oz by weight.

Amount to add per 10,000 gallons

ProductRaise 1 ppmRaise 5 ppm
Liquid chlorine, 12.5% sodium hypochlorite9.0 fl oz45 fl oz
Liquid chlorine, 12.5% trade10.2 fl oz51 fl oz
Liquid chlorine, 10% sodium hypochlorite11.6 fl oz58 fl oz
Household bleach, 8.25%14.5 fl oz72 fl oz
Household bleach, 6%20.5 fl oz103 fl oz
Cal-hypo, 65%2.05 oz10.3 oz
Cal-hypo, 73%1.83 oz9.1 oz
Dichlor, 56%2.38 oz11.9 oz
Trichlor, 90%1.48 oz7.4 oz

Granules and tablets are by weight; use a kitchen scale, because a cup of granules can weigh very different amounts. For 20,000 gallons, double the figures. Salt Lake County's pool dosage chart gives close to the same solid amounts for 10,000 gallons (2 oz cal-hypo, 2½ oz dichlor, 1½ oz trichlor per 1 ppm).

Which strength to enter for liquid chlorine and bleach

This is where most dosing goes wrong. Every registered liquid chlorine and bleach lists its strength in the Active Ingredient line as percent sodium hypochlorite by weight, for example "Sodium hypochlorite … 12.5%". Some pool chlorine is also sold by trade %, which is grams of chlorine per 100 mL. The two are not the same: a liquid that is 12.5% sodium hypochlorite by weight is about 14% trade, because the liquid is heavier than water and only 95% of the sodium hypochlorite counts as chlorine.

Grams of chlorine per liter = % sodium hypochlorite × 0.9525 × density × 10
Grams of chlorine per liter = trade % × 10

0.9525 is the chlorine share of sodium hypochlorite (70.906 ÷ 74.442). The density comes from makers' specification sheets: about 1.08 to 1.09 for 5 to 6% bleach and about 1.19 to 1.20 for 12.5% liquid. A handy check: one gallon of liquid chlorine at X% trade raises 10,000 gallons by about X ppm.

So enter the sodium hypochlorite % from your label, and pick Trade % only if your jug gives the strength that way. Two jugs both sold as "12.5%" can differ by more than 10%. Liquid chlorine also weakens with age, faster when it is stronger and when it is stored warm, so an old jug will raise the level less than the calculator says. Use plain, unscented bleach only; scented, splash-less and thickened bleaches contain other ingredients.

What free chlorine level to aim for

The right free chlorine level depends on your stabilizer, cyanuric acid (CYA). CYA protects chlorine from sunlight but also holds most of it in a weaker form, so the more CYA in the water, the more free chlorine you need for the same effect. The widely used rule is a minimum free chlorine of about 7.5% of the CYA level (Orenda; Trouble Free Pool). The calculator uses Trouble Free Pool's chart, which rounds CYA up to the next 10 and adds a target range that leaves room for a day's chlorine loss:

CYAMin FCTarget FCSalt: minSalt: target
0 (no stabilizer)11–311–3
2023–523–5
3024–623–6
4035–723–7
5046–823–8
6057–934–9
7058–1035–10
8069–1146–11
90710–1246–12
100811–1357–13

Salt pools can run lower because the generator adds chlorine all day instead of in one dose. With no stabilizer, the row comes from the CDC's minimum of 1 ppm for home pools and the 1 to 3 ppm swimming range printed on chlorine labels.

Targets versus the swim limit on your label

Many sodium hypochlorite labels say not to swim until chlorine is back to 1 to 3 ppm, and prohibit re-entry above 4 ppm. Always follow your label for when to swim. If your CYA is high enough that the minimum is above 4 ppm, that is a sign to keep CYA lower: Orenda suggests 30 to 50 ppm for home pools. CYA does not get used up, and only replacing water brings it down.

Public pool rules are different

Public pools follow state codes, many based on the CDC's Model Aquatic Health Code (MAHC). The MAHC is a voluntary model, so your state's rules may differ. Under the 2024 MAHC:

  • Free chlorine at least 1 ppm without CYA, at least 2 ppm with CYA, and at least 3 ppm in spas.
  • Free chlorine must not exceed 10 ppm while the pool is open, nor the limit on the product label.
  • CYA at most 90 ppm, and the pool closes if CYA is more than 45 times the free chlorine.

What each chlorine adds besides chlorine

ProductPer 1 ppm of chlorine addedpH
Liquid chlorine, bleachNo stabilizer or calcium; a little saltLittle lasting effect
Cal-hypoAbout 0.7 ppm calcium hardnessRaises it
DichlorAbout 0.9 ppm CYALowers it slightly
TrichlorAbout 0.6 ppm CYALowers pH and alkalinity

The CYA from tablets adds up quickly. A pool that loses 3 ppm of chlorine a day in summer and gets all of it from trichlor gains about 13 ppm of CYA a week (3 × 7 × 0.6). That is why many owners switch to liquid chlorine once CYA reaches the level they want.

How to add chlorine safely

  • Read the product label first and follow it where it differs from this page.
  • Never mix chlorine products with each other or with acid. Cal-hypo mixed with trichlor can catch fire or explode, and chlorine mixed with acid gives off chlorine gas. Use a separate, clean, dry scoop or cup for each chemical, and never put one chemical in a feeder or skimmer that has held another.
  • Dissolve granules first: water in the bucket first, then the granules, never water poured onto chemicals. Undissolved cal-hypo or dichlor can bleach a vinyl liner.
  • Wear eye protection and gloves, and pour low and slowly with the pump running, never while people are in the water.
  • Wait to swim until free chlorine is down to the level your label allows.
  • Store chlorine cool, dry and out of the sun, away from acid, and out of reach of children and pets.

Why the chlorine did not rise as expected

  • The pool volume is off. A 20% error in gallons is a 20% error in the dose. The salt check on the pool volume calculator can measure the real size; chlorine cannot, because some of it gets used up straight away.
  • Something is using it up. Algae, organic debris or a heavy swim load consume chlorine. Trouble Free Pool's overnight test is a good check: test free chlorine after sunset and again before sunrise; losing more than about 1 ppm overnight points to algae or another demand.
  • The product is weaker than its label, usually because it is old or was stored hot.
  • The test bleached out. Above about 10 ppm, DPD tests can bleach out and read falsely low. A FAS-DPD drop kit reads high levels accurately.

Pool chlorine questions

Can I use household bleach instead of pool chlorine?

Yes. It is the same chemical, sodium hypochlorite, just weaker, so you need more of it: two to two and a half times as much 6% bleach as 12.5% liquid chlorine. Use plain, unscented bleach with no additives.

How long after adding chlorine can I swim?

Once it has mixed in and free chlorine is at or below the limit on your product label; many labels say 4 ppm. Test after about 30 minutes of circulation. After a large dose it can take a day or more to come down.

How many chlorine tablets does my pool need?

Tablet makers suggest about one 3-inch tablet per 5,000 gallons a week (Leslie's), but the real need depends on sun, heat and swimmers; the calculator shows the figure for your pool when you pick trichlor. Tablets keep chlorine topped up but cannot raise it quickly, and they add stabilizer every week, so watch your CYA. Trouble Free Pool suggests keeping CYA at 30 to 60 ppm if you add chlorine yourself, and 60 to 90 ppm with a salt generator.

Does a saltwater pool need chlorine?

The generator makes it from the salt, so normally you raise the generator's output instead. Liquid chlorine is the usual way to give a salt pool a quick boost; it uses the same targets, shown in the salt pool columns above.

Is this the same as shocking the pool?

No. This calculator is for routine chlorine. Clearing algae or cloudy water takes a much higher, sustained level, which is a separate job; follow your product label for shocking.

Sources

Last checked November 22, 2026. Always follow the label on your chlorine product.

Related calculators

Chlorine to add–